Nutec Bickley's Blog

Configuration of firing lines in intermittent kilns

Sep 26, 2019 10:10:37 AM

The arrangement of burners inside a kiln is a key factor in obtaining the best possible temperature uniformity.

This uniformity is especially critical in the ceramic industry, as otherwise products can be damaged or have quality flaws.

Below, we will talk about the types of firing line...

Continue reading →

Nutec Bickley Makes Further Addition to Sanitaryware Portfolio

Sep 12, 2019 1:42:35 PM

Demonstrating once again that we are recognized all around the world for expertise, performance, reliability and value when it comes to firing ceramics, Nutec Bickley is in the process of comprehensively testing its latest kiln for the sector. As usual, all testing is taking place at our...

Continue reading →

The installation of ceramic fiber insulation

Aug 9, 2019 10:00:00 AM

Although we might think that the installation of insulation in an industrial furnace is a simple matter, the reality is that when it is carried out without the appropriate engineering studies, it is most likely that we will later encounter some common problems, such as:

  • Heat leaks that are...

Continue reading →

Energy optimization in industrial kilns with our energy recovery systems (ERS)

Feb 8, 2019 12:00:46 PM

Our industrial kilns are specially designed to optimize energy efficiency by various means, one of the main opportunities being the recuperation of heat normally lost through the exhaust flue during the combustion process.

Continue reading →

Software options that we use in the design and development of our kilns, in order to reduce operating costs

Jan 18, 2019 12:21:01 PM

At Nutec Bickley we work with different tools that allow us to generate substantial savings and to increase process efficiency for our clients.

Continue reading →

Product Showcase: Tunnel Kilns

May 26, 2018 12:26:01 PM

Tunnel kilns become the most efficient and consistent firing method when required volumes become large and consistent. They have become significantly more flexible in recent years with intelligent controls but they still demand higher production capacities.

Continue reading →

Kilns for Ceramics: Industries Served

May 26, 2018 12:18:02 PM

For many years Nutec Bickley have been manufacturing kilns for different industries and different years have proved busy in different areas. We have often found that if kilns for Ceramics have been busy then kilns for the Metal Industries have been quiet and visa versa. 2017 is shaping up to be...

Continue reading →

Crossing the line – firing ceramic sanitaryware under 1,000 Kcal per kg of ware.

May 26, 2018 12:17:10 PM

Over the past years, much have been said about specific fuel consumption on tunnel kilns in sanitaryware plants.

A lot of information can be found in trade magazines, advertising and social media about this important topic. However, in real life, very few kilns out there can do this.

Continue reading →

Nutec Bickley selected to supply kilns to fire Ceramic Colors

May 26, 2018 12:16:25 PM

On the 1st quarter of 2017, Nutec Bickley got awarded with a contract to supply 5 shuttle kilns and 2 tunnel kilns to fire ceramic colors.

The kilns to be supplied on this project, will integrate all the latest technology developments such as:

Continue reading →

High Temperature Kilns: Firing Ceramics Using Energy Recovery Technology

May 26, 2018 10:55:23 AM

As the subject of energy consumption in the ceramic industry remains at the forefront for all manufacturers, and at a time when the potential problems around supply and tariffs resonate more and more each day, it’s good to know that there’s a proven technology to which people can turn to ensure...

Continue reading →